• 0

Project Consultancy, Reports & Profiles

Best Business Opportunities in Manipur - Identification and Selection of right Project, Thrust areas for Investment, Industry Startup and Entrepreneurship

 

Manipur is a state in north Eastern India, with the city of Imphal as its capital. Manipur has been at the crossroads of Asian economic and cultural exchange for more than 2500 years. It has long connected Indian subcontinent to Southeast Asia, enabling migration of people, cultures and religions. Manipur is primarily an agrarian economy, with significant hydroelectric power generation potential.

The natural vegetation occupies an area of about 14,365 km² which is nearly 64% of the total geographical area of the state. The vegetation consists of a large variety of plants ranging from short and tall grasses, reeds and bamboos to trees of various species. Broadly, there are four types of forests - Tropical Semi-evergreen, Dry Temperate Forest, Sub-Tropical Pine and Tropical Moist Deciduous.


DEMOGRAPHIC PROFILE

Manipur has population of 25.7 Lakhs, an increase from figure of 22.94 Lakh. Total population of Manipur as per 2011 census is 2,570,390 of which male and female are 1,290,171 and 1,280,219 respectively.

Total area of Manipur is 22,327 sq. km. Density of Manipur is 115 per sq km which is lower than national average 382 per sq km. In 2001, density of Manipur was 103 per sq km.

Of the total population of Manipur state, around 67.55 percent live in the villages of rural areas. In actual numbers, males and females were 878,469 and 857,767 respectively. Total population of rural areas of Manipur state was 1,736,236. In rural areas of Manipur, literacy rate for males and female stood at 83.39 % and 67.03 %. Average literacy rate in Manipur for rural areas was 76.20 percent. Total literates in rural areas were 1,142,564.

TOURISM

Least touched and least discovered Manipur promises to be the great tourist discovery of the21st century. An oval shaped valley surrounded by blue green hills, rich in art and tradition has inspired description such as the Switzerland of the East with its cascading rapids, tripling rivers, varieties of flowers, exotic blooms and lakes. The people of Manipur include Meitei, Nagas, Kuki-Chin-Mizo and Gorkhas groups and Muslims and other colorful communities which have lived in complete harmony for centuries.

The Ministry of Tourism has five Regional offices located at Kolkata (East), Mumbai (West), Delhi (North), Chennai (South) and Guwahati (North East), which are headed by an officer of the level of Deputy Director General designated as Regional Director.

Domestic tourists intending to visit Manipur by road via Dimapur/Kohima require Inner Line Permits to pass through Nagaland. These are issued by the Liaison officers of the Government of Nagaland at New Delhi, Calcutta, Guwahati, Shillong and the Sub-divisional officer (Civil), Dimapur, deputy Commissioner, Imphal can also issue permits to tourists traveling by road from imphal to Kohima and Dimapur in Nagaland.

INDUSTRY SECTOR

The Information Technology and IT Enabled Services sector in India is looking towards Tier-II and Tier-III cities to meet the growing demands of the industry for sourcing its required skilled manpower. The youth of Manipur have not only excelled in the field of Sports, but have already established a noticeable presence in the ITES industry in India.

Manipur State is striving to score higher on being business-friendly in terms of the available IT infrastructure. These include:

•        Software Technology Parks of India (STPI) unit of Imphal with Earth station and OFC connectivity.

•        Up gradation of IT infrastructure at Imphal to provide modern Business-ready built-up office space for IT/ITES firms.

•        Internet on the move – Various Telcos like BSNL, Tata Indicom, Airtel etc. are providing Wireless Internet across the State.

A high rate of unemployment exists in Manipur, particularly among the educated youth. According to the Live Register of Employment Exchange, the total number of educated job-seekers were recorded as 5, 83.65 thousands.

Manipur is rich in natural resources but due to difficult terrain, inadequate infrastructural facilities and varying climatic conditions, the state could not develop much in the industrial sector of its economy. In the initial stage, Govt. policy in the state was one of revival and revitalization of the traditional handlooms and handicrafts of the local habitats. The contribution of the manufacturing sector to the total gross state domestic product at current prices is found to be 6.17 percent. The trend of industrial development and the present local conditions of the state and in consonance with industrial policy of the Government of India, the Govt. of Manipur in its policy announcement of 1990, has decided to focus attention to the small scale and agro-based industries without discouraging the medium and large-scale industries. It is expected to serve the objective of employment generation and dispersal of industries in rural and urban areas. The state has laid emphasis on creating a strong industrial base and employment opportunities in the state through provision of various growth inducing factors based on locally available resources. It is based on locally available raw materials and minerals. In order to promote rapid industrialization, the State Government has over the years been offering attractive package of incentives and concessions to invigorative industries.

The khadi and Village Industries Commission (KVIC) was established by the Govt. of India in the year 1957. The Khadi and Village Industries is not only providing employment to people in rural and semi-urban areas at low investment per job, but also utilizes local skill resources and provides part-time as well as full time work to rural artisans, women and minorities.

The traditional sector of industries falls within the purview of organizations such as Khadi and Village Industries Commission. The KVIC include artisans in tiny industrial units and defines it as any industry located in a village or town inhabited by population not exceeding 10000 which produces goods and renders services with or without the use of power in which the fixed capital per head does not exceed Rs.15000.

Growth Centres are large villages or small towns which have the potential to become the nuclei for the socio-economic development of the surrounding area. The Growth Centres can be identified by the different orders with respect to the quality and quantity of services and facilities, service area and population. A growth centre of lowest order should have services such as agricultural input centre, primary and middle school, maternity and child care centres and daily market.

Small-Scale Industries (SSI) is an important segment of the economy, contributing substantially in the form of production, employment and exports. It has continued to play a vital role in the fulfillment of socio-economic objectives. The principal factor for defining small-scale Industries has always been based on the size of investment. Small-Scale Industries are those industries whose investment in fixed assets such as plants and machineries does not exceed Rs.100.00 lakhs (Rs.1 Crore). Investment in plant and machinery in respect of industry related Small-Scale Service and Business Enterprises (SSSBE) were increased to Rs.10.00 lakhs from Rs.5.00 lakhs. For speedy growth of small-scale industries, the Government has already brought about simplifications in the SSI registration procedures.

The State Government has introduced this Policy with various components being offered such as, incentives, improved infrastructure facilities, supply of quality power, and credit flow from Bank and Financial institutions, better market linkages and to boost investor confidence.

The Government of Manipur desire Manipur to be a preferred destination for industrial and trade activities and achieving to the aspiration of the people of Manipur, thereby affording to –

•        All round economic development and to improve living standards.

•        To create employment opportunities, skill development and self

•        Employment opportunities.

•        Optimal utilization of both natural and physical resources.

OBJECTIVE OF INDUSTRIAL POLICY

•        Develop adequate infrastructures to ensure planned and accelerated industrial development.

•        Promote maximum capital investment in the State for economic activities resulting in employment opportunities, improving standard of living of people at large and all-round development of the State.

•        Promote modernization and technology up-gradation of existing industrial units.

•        Encourage quality control, standardization and competitiveness of local products.

•        Promote eco-friendly industries.


INDUSTRIAL ACTIVITIES IDENTIFIED AS THRUST AREAS

•             Agro based industry 

•             Bio-Technology industries.

•             Floriculture. 

•             Handloom and Handicraft.

•             Medicinal Plants.

•             Distillation of oils from aromatic plants.

•             Mineral based industries.

•             Information Technology Trade and Commerce under Export Import mechanisms.

 

Tags

 

Doing Business and Investing in Manipur, Scope for Venturing in Manipur, Manipur: Identification and Selection of right Project, Manipur: Thrust areas for Investment Opportunities, Manipur: Industry Startup and Entrepreneurship, India: Doing Business and Investing in India, Starting business in Manipur, Investment Opportunities-Manipur, Project Opportunities-Manipur, Investment Opportunities in Manipur, INDIA, Emerging North-East India, Startup Business, How to Start a Small Business in India?, How to Start a Small Business in Manipur?, Catch The Opportunity - Start your business today‎, Starting BusinessManipuri Entrepreneurship, Women Entrepreneurs in Manipur, Choosing the Location of the Industry, Creating a Business Plan, How to Start a Business Enterprise, Projects for North Eastern States, Industry for North Eastern States, Business for North Eastern States, Top Profitable Business Opportunities in Manipur, Top Profitable Business Opportunities in North Eastern States, Investment Potentials in Manipur,  Potential Projects for Manipur,  Potential Projects for North Eastern States, Manipur best investment plan and opportunities offered for investors, State wise Industry Opportunities, Thrust Areas for Manipur, Sourcing Process, Raw Materials, Machineries and Equipments, Small Business Ideas In Manipur, Business Opportunity for Manipur, Project Opportunity for Manipur, Business Opportunities in Manipur, Scope for Venturing Agri-Business in Manipur, Business Opportunities in Imphal, SSI for Manipur, Small scale projects for Manipur, Small scale business for Manipur, Small scale industry for Manipur, Investment Opportunities and Potential projects for Manipur, Key growth drivers, Food and bamboo processing, major thrust sectors of Manipur, major thrust areas of Manipur, Projects in Manipur, Manipur: Information on Bamboo, Tourism Industry, Economy

 

Reasons for buying our reports:

• This report helps you to identify a profitable project for investing or diversifying into by throwing light to crucial areas like industry size, market potential of the product and reasons for investing in the product

• This report provides vital information on the product like its characteristics and segmentation

• This report helps you market and place the product correctly by identifying the target customer group of the product 

• This report helps you understand the viability of the project by disclosing details like machinery required, project costs and snapshot of other project financials

• The report provides a glimpse of government regulations applicable on the industry

• The report provides forecasts of key parameters which helps to anticipate the industry performance and make sound business decisions.

 

Our Approach:

• Our research reports broadly cover Indian markets, present analysis, outlook and forecast for a period of five years.

• The market forecasts are developed on the basis of secondary research and are cross-validated through interactions with the industry players

• We use reliable sources of information and databases. And information from such sources is processed by us and included in the report



We can provide you detailed project reports on the following topics. Please select the projects of your interests.

Each detailed project reports cover all the aspects of business, from analysing the market, confirming availability of various necessities such as plant & machinery, raw materials to forecasting the financial requirements. The scope of the report includes assessing market potential, negotiating with collaborators, investment decision making, corporate diversification planning etc. in a very planned manner by formulating detailed manufacturing techniques and forecasting financial aspects by estimating the ost of raw material, formulating the cash flow statement, projecting the balance sheet etc.

We also offer self-contained Pre-Investment and Pre-Feasibility Studies, Market Surveys and Studies, Preparation of Techno-Economic Feasibility Reports, Identification and Selection of Plant and Machinery, Manufacturing Process and or Equipment required, General Guidance, Technical and Commercial Counseling for setting up new industrial projects on the following topics. Many of the engineers, project consultant & industrial consultancy firms in India and worldwide use our project reports as one of the input in doing their analysis.

Sort by :
Printed Envelopes  (With Window without Window in Single Colour & Multi Colour)
Printed Envelopes (With Window without Window in Single Colour & Multi Colour)

An envelope is the rectangular paper ... Read More

Capacity :
0
Plant and Machinery cost:
0.00 Lakhs
Working Capital :
0.00
Rate of Return (ROR):
0.00%
Break Even Point (BEP):
0.00 %
TCI :
0.00 Lakhs
Cost of Project :
0.00Lakhs
Add To Inquiry Basket
Tea Bag
Tea Bag

A tea bag (or "teabag")... Read More

Capacity :
0
Plant and Machinery cost:
0.00 Lakhs
Working Capital :
0.00
Rate of Return (ROR):
0.00%
Break Even Point (BEP):
0.00 %
TCI :
0.00 Lakhs
Cost of Project :
0.00Lakhs
Add To Inquiry Basket
Flush Door, Chip Board, Hard Board, Insulating Board
Flush Door, Chip Board, Hard Board, Insulating Board

Flus... Read More

Capacity :
0
Plant and Machinery cost:
0.00 Lakhs
Working Capital :
0.00
Rate of Return (ROR):
0.00%
Break Even Point (BEP):
0.00 %
TCI :
0.00 Lakhs
Cost of Project :
0.00Lakhs
Add To Inquiry Basket
Bulk Drugs
Bulk Drugs

A bulk drug also called active pharma... Read More

Capacity :
0
Plant and Machinery cost:
0.00 Lakhs
Working Capital :
0.00
Rate of Return (ROR):
0.00%
Break Even Point (BEP):
0.00 %
TCI :
0.00 Lakhs
Cost of Project :
0.00Lakhs
Add To Inquiry Basket
Homeo & Bio Medicines with Mother Tincture
Homeo & Bio Medicines with Mother Tincture

Homeopathy is a type of option drug made in 1796 by Samuel Hahnemann taking into account his r... Read More

Capacity :
0
Plant and Machinery cost:
0.00 Lakhs
Working Capital :
0.00
Rate of Return (ROR):
0.00%
Break Even Point (BEP):
0.00 %
TCI :
0.00 Lakhs
Cost of Project :
0.00Lakhs
Add To Inquiry Basket
Aerosol Spray [Rose Flavour Tube, Night Queen, Jasmin]
Aerosol Spray [Rose Flavour Tube, Night Queen, Jasmin]

Aerosol spray is a type of dispensing system which creates an aerosol mist of liquid particles... Read More

Capacity :
0
Plant and Machinery cost:
0.00 Lakhs
Working Capital :
0.00
Rate of Return (ROR):
0.00%
Break Even Point (BEP):
0.00 %
TCI :
0.00 Lakhs
Cost of Project :
0.00Lakhs
Add To Inquiry Basket
Nylon Polyester & Polypropylene Rope
Nylon Polyester & Polypropylene Rope

Polyester ropes are almost as strong as nylon when dry. Polyester retains its strength when wet, and thus polyester ropes are generally stronger th... Read More

Capacity :
0
Plant and Machinery cost:
0.00 Lakhs
Working Capital :
0.00
Rate of Return (ROR):
0.00%
Break Even Point (BEP):
0.00 %
TCI :
0.00 Lakhs
Cost of Project :
0.00Lakhs
Add To Inquiry Basket
Ultramarine Blue
Ultramarine Blue

Ultramarine is a deep blue color and a pigment which was originally made by grinding lapis lazuli into a powder. The name comes from the Latin ultr... Read More

Capacity :
0
Plant and Machinery cost:
0.00 Lakhs
Working Capital :
0.00
Rate of Return (ROR):
0.00%
Break Even Point (BEP):
0.00 %
TCI :
0.00 Lakhs
Cost of Project :
0.00Lakhs
Add To Inquiry Basket
Resin Cored Soldering Wire
Resin Cored Soldering Wire

Resin cored solder wire is suitable for safe use on electrical and electronic work such as com... Read More

Capacity :
0
Plant and Machinery cost:
0.00 Lakhs
Working Capital :
0.00
Rate of Return (ROR):
0.00%
Break Even Point (BEP):
0.00 %
TCI :
0.00 Lakhs
Cost of Project :
0.00Lakhs
Add To Inquiry Basket
Grinding Media Ball
Grinding Media Ball

A ball mill is a type of grinder used to grind and blend materials for use in mineral dressing processes, paints, pyro... Read More

Capacity :
0
Plant and Machinery cost:
0.00 Lakhs
Working Capital :
0.00
Rate of Return (ROR):
0.00%
Break Even Point (BEP):
0.00 %
TCI :
0.00 Lakhs
Cost of Project :
0.00Lakhs
Add To Inquiry Basket
Open Top Sanitary Cans for Food, Pesticides, Paint
Open Top Sanitary Cans for Food, Pesticides, Paint

A rigid metal container which can be hermetically sealed for packing of thermally and non-thermally processed foods an... Read More

Capacity :
0
Plant and Machinery cost:
0.00 Lakhs
Working Capital :
0.00
Rate of Return (ROR):
0.00%
Break Even Point (BEP):
0.00 %
TCI :
0.00 Lakhs
Cost of Project :
0.00Lakhs
Add To Inquiry Basket
Armoured Cable
Armoured Cable

Armoured cable has an extra layer of protection to keep it from being cut or abraded. The armor layer of coax cable is a foil wrap that is ribbed l... Read More

Capacity :
0
Plant and Machinery cost:
0.00 Lakhs
Working Capital :
0.00
Rate of Return (ROR):
0.00%
Break Even Point (BEP):
0.00 %
TCI :
0.00 Lakhs
Cost of Project :
0.00Lakhs
Add To Inquiry Basket
Pressure Cooker
Pressure Cooker

A pressure cooker is an airtight cooking device that cooks food quickly. Pressure cooker, hermetically sealed pot whic... Read More

Capacity :
0
Plant and Machinery cost:
0.00 Lakhs
Working Capital :
0.00
Rate of Return (ROR):
0.00%
Break Even Point (BEP):
0.00 %
TCI :
0.00 Lakhs
Cost of Project :
0.00Lakhs
Add To Inquiry Basket
Outdoor & Indoor Entertainment Centre
Outdoor & Indoor Entertainment Centre

An entertainment center is a piece of furniture designed to house consumer electronic appliances and components, such ... Read More

Capacity :
0
Plant and Machinery cost:
0.00 Lakhs
Working Capital :
0.00
Rate of Return (ROR):
0.00%
Break Even Point (BEP):
0.00 %
TCI :
0.00 Lakhs
Cost of Project :
0.00Lakhs
Add To Inquiry Basket
Zari Yarn
Zari Yarn

Zari (or Jari) is an even thread traditionally made of fine gold or silver used in traditional Indian, and Pakistani g... Read More

Capacity :
0
Plant and Machinery cost:
0.00 Lakhs
Working Capital :
0.00
Rate of Return (ROR):
0.00%
Break Even Point (BEP):
0.00 %
TCI :
0.00 Lakhs
Cost of Project :
0.00Lakhs
Add To Inquiry Basket
Fiber Optic Cable Production
Fiber Optic Cable Production

Fiber Optic Cable Production. Optical Fiber Cable Manufacturing Industry

...
Read More
Capacity :
0
Plant and Machinery cost:
0.00 Lakhs
Working Capital :
0.00
Rate of Return (ROR):
0.00%
Break Even Point (BEP):
0.00 %
TCI :
0.00 Lakhs
Cost of Project :
0.00Lakhs
Add To Inquiry Basket
Biodegradable Plastic Products (Bags, Plates & Glasses)
Biodegradable Plastic Products (Bags, Plates & Glasses)

Biodegradable plastics are mainly derived from corn, wheat and potato starch. Biodegradable plastics products are ther... Read More

Capacity :
Bio-Plastic Glasses (wt. each Glass 16 gms) : 62500 Pcs/Day Bio-Plastic Plates (wt. each Plate 40
Plant and Machinery cost:
156.00 Lakhs
Working Capital :
0.00
Rate of Return (ROR):
28.00%
Break Even Point (BEP):
41.00 %
TCI :
0.00 Lakhs
Cost of Project :
789.00Lakhs
Add To Inquiry Basket
High Tensile Nuts & Bolts (For Automobile Industry)
High Tensile Nuts & Bolts (For Automobile Industry)

A fastener is a connective mechanism that mechanically joins or affixes two or more objects together. A bolt is an externally threaded fastener des... Read More

Capacity :
Mild Steel/HT Bolts (DR M8-M16) : 20 MT/Day Mild Steel/HT Nuts (DR M18-M30) : 6 MT/Day
Plant and Machinery cost:
378.00 Lakhs
Working Capital :
0.00
Rate of Return (ROR):
26.00%
Break Even Point (BEP):
55.00 %
TCI :
0.00 Lakhs
Cost of Project :
744.00Lakhs
Add To Inquiry Basket
Thinners and Solvent Thinners  (Blending and Bottling)
Thinners and Solvent Thinners (Blending and Bottling)

A thinner is a solvent used to thin oil-based paints or clean up after their use. Commercially, solvents labeled "Pain... Read More

Capacity :
Thinner (1 Ltrs Size) : 4000 Bottles/Day Solvent Thinner (1 Ltrs Size) : 4000 Bottles/Day
Plant and Machinery cost:
198.00 Lakhs
Working Capital :
0.00
Rate of Return (ROR):
25.00%
Break Even Point (BEP):
56.00 %
TCI :
0.00 Lakhs
Cost of Project :
395.00Lakhs
Add To Inquiry Basket
Solar Power Plant
Solar Power Plant

Solar power is one of the most promising renewables. It is reliable and less vulnerable to changes in seasonal weather... Read More

Capacity :
1 MW
Plant and Machinery cost:
411.00 Lakhs
Working Capital :
0.00
Rate of Return (ROR):
0.00%
Break Even Point (BEP):
0.00 %
TCI :
0.00 Lakhs
Cost of Project :
811.00Lakhs
Add To Inquiry Basket
Craft Beer
Craft Beer

A microbrewery or craft brewery is a brewery that produces small amounts of beer (or sometimes root beer). The main ra... Read More

Capacity :
10000 Ltrs./Day
Plant and Machinery cost:
522.00 Lakhs
Working Capital :
0.00
Rate of Return (ROR):
27.00%
Break Even Point (BEP):
56.00 %
TCI :
0.00 Lakhs
Cost of Project :
1040.00Lakhs
Add To Inquiry Basket
Noodles, Vermicelli, Macaroni and Spaghetti Production Business
Noodles, Vermicelli, Macaroni and Spaghetti Production Business

Noodles, Vermicelli, Macaroni and Spaghetti Production Business. Start a Profitable P... Read More

Capacity :
0
Plant and Machinery cost:
0.00 Lakhs
Working Capital :
0.00
Rate of Return (ROR):
0.00%
Break Even Point (BEP):
0.00 %
TCI :
0.00 Lakhs
Cost of Project :
0.00Lakhs
Add To Inquiry Basket
Brass and Aluminium Hinges
Brass and Aluminium Hinges

Brass is a metallic alloy that is made of copper and zinc. The proportions of zinc and copper can vary to create diffe... Read More

Capacity :
0
Plant and Machinery cost:
0.00 Lakhs
Working Capital :
0.00
Rate of Return (ROR):
0.00%
Break Even Point (BEP):
0.00 %
TCI :
0.00 Lakhs
Cost of Project :
0.00Lakhs
Add To Inquiry Basket
Mosquito Repellant Oil
Mosquito Repellant Oil

 

An insect repellent is a substance applied to skin, clothing, or other surfaces... Read More

Capacity :
0
Plant and Machinery cost:
0.00 Lakhs
Working Capital :
0.00
Rate of Return (ROR):
0.00%
Break Even Point (BEP):
0.00 %
TCI :
0.00 Lakhs
Cost of Project :
0.00Lakhs
Add To Inquiry Basket
PRINTED TIN CONTAINERS (TIN CANS)
PRINTED TIN CONTAINERS (TIN CANS)

A tin can, tin (especially in British English, Australian English and Canadian English), steel can,[1] steel packaging... Read More

Capacity :
0
Plant and Machinery cost:
0.00 Lakhs
Working Capital :
0.00
Rate of Return (ROR):
0.00%
Break Even Point (BEP):
0.00 %
TCI :
0.00 Lakhs
Cost of Project :
0.00Lakhs
Add To Inquiry Basket
C P BATH ROOM FITTING (CHROME PLATED)
C P BATH ROOM FITTING (CHROME PLATED)

Chrome plating is used in a number of metallic products to increase its durability, because products which are chrome ... Read More

Capacity :
0
Plant and Machinery cost:
0.00 Lakhs
Working Capital :
0.00
Rate of Return (ROR):
0.00%
Break Even Point (BEP):
0.00 %
TCI :
0.00 Lakhs
Cost of Project :
0.00Lakhs
Add To Inquiry Basket
Safety Pin, Paper Pin and Gem Clips
Safety Pin, Paper Pin and Gem Clips

The safety pin is a variation of the regular pin which includes a simple spring mechanism and a clasp. The clasp serve... Read More

Capacity :
0
Plant and Machinery cost:
0.00 Lakhs
Working Capital :
0.00
Rate of Return (ROR):
0.00%
Break Even Point (BEP):
0.00 %
TCI :
0.00 Lakhs
Cost of Project :
0.00Lakhs
Add To Inquiry Basket
Mango Processing (Pulp & Juices)
Mango Processing (Pulp & Juices)

Mango Pulp is the concentrated mango juice obtained on processing of various varieties of mangoes. The processed mango... Read More

Capacity :
0
Plant and Machinery cost:
0.00 Lakhs
Working Capital :
0.00
Rate of Return (ROR):
0.00%
Break Even Point (BEP):
0.00 %
TCI :
0.00 Lakhs
Cost of Project :
0.00Lakhs
Add To Inquiry Basket
Production and Formulation of Fish and Shrimp (Prawn) Feed
Production and Formulation of Fish and Shrimp (Prawn) Feed

Production and Formulation of Fish and Shrimp (Prawn) Feed. Commercial Aquaculture Feed Manufacturing Business Read More

Capacity :
0
Plant and Machinery cost:
0.00 Lakhs
Working Capital :
0.00
Rate of Return (ROR):
0.00%
Break Even Point (BEP):
0.00 %
TCI :
0.00 Lakhs
Cost of Project :
0.00Lakhs
Add To Inquiry Basket
Aluminium Hydroxide IP
Aluminium Hydroxide IP

Aluminium hydroxide, Al (OH) 3, is found in nature as the mineral gibbsite (also known as hydr... Read More

Capacity :
0
Plant and Machinery cost:
0.00 Lakhs
Working Capital :
0.00
Rate of Return (ROR):
0.00%
Break Even Point (BEP):
0.00 %
TCI :
0.00 Lakhs
Cost of Project :
0.00Lakhs
Add To Inquiry Basket
Silicon Release Paper
Silicon Release Paper

Silicone Release Paper makes a big impact in a lot of little ways throughout our daily lives. From the bandage p... Read More

Capacity :
0
Plant and Machinery cost:
0.00 Lakhs
Working Capital :
0.00
Rate of Return (ROR):
0.00%
Break Even Point (BEP):
0.00 %
TCI :
0.00 Lakhs
Cost of Project :
0.00Lakhs
Add To Inquiry Basket
Corrosion Controlling Chemicals (Pipe Lines)
Corrosion Controlling Chemicals (Pipe Lines)

Corrosion control solutions protect the lifetime and productivity of your assets by reducing equipment failure, maximizing production time, and red... Read More

Capacity :
0
Plant and Machinery cost:
0.00 Lakhs
Working Capital :
0.00
Rate of Return (ROR):
0.00%
Break Even Point (BEP):
0.00 %
TCI :
0.00 Lakhs
Cost of Project :
0.00Lakhs
Add To Inquiry Basket
Rubber Band
Rubber Band

Rubber band manufacturing is one of the viable small scale business concepts which any of the aspiring entrepreneurs can explore for a successful b... Read More

Capacity :
0
Plant and Machinery cost:
0.00 Lakhs
Working Capital :
0.00
Rate of Return (ROR):
0.00%
Break Even Point (BEP):
0.00 %
TCI :
0.00 Lakhs
Cost of Project :
0.00Lakhs
Add To Inquiry Basket
Aloe Vera Gel and Powder Manufacturing Business
Aloe Vera Gel and Powder Manufacturing Business

Aloe Vera Gel and Powder Manufacturing Business. Start a Profitable Aloe Vera Process... Read More

Capacity :
0
Plant and Machinery cost:
0.00 Lakhs
Working Capital :
0.00
Rate of Return (ROR):
0.00%
Break Even Point (BEP):
0.00 %
TCI :
0.00 Lakhs
Cost of Project :
0.00Lakhs
Add To Inquiry Basket
Low Tension Cables, LT Power Cables Manufacturing Industry
Low Tension Cables, LT Power Cables Manufacturing Industry

Low Tension Cables, LT Power Cables Manufacturing Industry. Industrial LT Cables Prod... Read More

Capacity :
0
Plant and Machinery cost:
0.00 Lakhs
Working Capital :
0.00
Rate of Return (ROR):
0.00%
Break Even Point (BEP):
0.00 %
TCI :
0.00 Lakhs
Cost of Project :
0.00Lakhs
Add To Inquiry Basket
Agar Agar (Bacteriological Grade) Manufacturing Industry
Agar Agar (Bacteriological Grade) Manufacturing Industry

Agar Agar (Bacteriological Grade) Manufacturing Industry.

Read More

Capacity :
0
Plant and Machinery cost:
0.00 Lakhs
Working Capital :
0.00
Rate of Return (ROR):
0.00%
Break Even Point (BEP):
0.00 %
TCI :
0.00 Lakhs
Cost of Project :
0.00Lakhs
Add To Inquiry Basket
Gypsum Plaster Board
Gypsum Plaster Board

Gypsum Plaster Boards are constructional sheets composed of consigned Gypsum with about 15% fibre. Its outstanding contribu... Read More

Capacity :
50000 Sq.mt./Day
Plant and Machinery cost:
1605.00 Lakhs
Working Capital :
0.00
Rate of Return (ROR):
34.00%
Break Even Point (BEP):
32.00 %
TCI :
0.00 Lakhs
Cost of Project :
12502.00Lakhs
Add To Inquiry Basket
Roller Flour Mill  with Packaging (Automatic Plant)
Roller Flour Mill with Packaging (Automatic Plant)

Roller Flour Milling sector processes around 12 – 15 per cent of the total wheat consumed in the country, the balance being processed through... Read More

Capacity :
Maida: 40 MT/Day Sooji : 15 MT/Day Wheat Flour : 8 MT/Day Wheat Bran : 17 MT/Day Besan : 20 MT/Day
Plant and Machinery cost:
290.00 Lakhs
Working Capital :
0.00
Rate of Return (ROR):
29.00%
Break Even Point (BEP):
56.00 %
TCI :
0.00 Lakhs
Cost of Project :
806.00Lakhs
Add To Inquiry Basket
Wood Pulp
Wood Pulp

Wood pulp is wood that has been cut up into small pieces and crushed. Wood pulp is used to make paper. Wood reduced to pulp through mechanical and ... Read More

Capacity :
0
Plant and Machinery cost:
0.00 Lakhs
Working Capital :
0.00
Rate of Return (ROR):
0.00%
Break Even Point (BEP):
0.00 %
TCI :
0.00 Lakhs
Cost of Project :
0.00Lakhs
Add To Inquiry Basket
Auto Head Light
Auto Head Light

A headlamp is a lamp attached to the front of a vehicle to light the road ahead. While it is common for the term headlight to be used interchangeab... Read More

Capacity :
0
Plant and Machinery cost:
0.00 Lakhs
Working Capital :
0.00
Rate of Return (ROR):
0.00%
Break Even Point (BEP):
0.00 %
TCI :
0.00 Lakhs
Cost of Project :
0.00Lakhs
Add To Inquiry Basket
Production of Dehydrated Vegetables, Mushroom and Soup
Production of Dehydrated Vegetables, Mushroom and Soup

Production of Dehydrated Vegetables, Mushroom and Soup. Start a Dehydrating Vegetables Business. Vegetable Dehydra... Read More

Capacity :
0
Plant and Machinery cost:
0.00 Lakhs
Working Capital :
0.00
Rate of Return (ROR):
0.00%
Break Even Point (BEP):
0.00 %
TCI :
0.00 Lakhs
Cost of Project :
0.00Lakhs
Add To Inquiry Basket
Layer Poultry Farming Business
Layer Poultry Farming Business

Layer Poultry Farming Business. Start a Layer Chicken Farming Business for Egg Production

Read More

Capacity :
0
Plant and Machinery cost:
0.00 Lakhs
Working Capital :
0.00
Rate of Return (ROR):
0.00%
Break Even Point (BEP):
0.00 %
TCI :
0.00 Lakhs
Cost of Project :
0.00Lakhs
Add To Inquiry Basket
Readymade Garments
Readymade Garments

Readymade garments are a part of our daily life. Clothes are an epitome of a culture. People in different parts of the world have their own styles ... Read More

Capacity :
Shirts: 1000 Pcs./Day Trousers : 1000 Pcs./Day
Plant and Machinery cost:
169.00 Lakhs
Working Capital :
0.00
Rate of Return (ROR):
28.00%
Break Even Point (BEP):
59.00 %
TCI :
0.00 Lakhs
Cost of Project :
447.00Lakhs
Add To Inquiry Basket
Pan Masala, Tobacco, Zarda and Kimam
Pan Masala, Tobacco, Zarda and Kimam

Pan Masala is a balanced mixture of betel leaf with lime, areca nut, clove, cardamom, mint, tobacco, essence and other ingredients. It is an agricu... Read More

Capacity :
Sada Pan Masala (5 gms Pouches & 100 gms Tin Pack) : 100 Kgs/Day Meetha Pan Masala (5 gms Pouches &
Plant and Machinery cost:
13.00 Lakhs
Working Capital :
0.00
Rate of Return (ROR):
32.00%
Break Even Point (BEP):
76.00 %
TCI :
0.00 Lakhs
Cost of Project :
53.00Lakhs
Add To Inquiry Basket
uPVC Profiles for Doors and Windows
uPVC Profiles for Doors and Windows

The upvc profile is basically an extruded section of a mixture of pvc with certain additives to make it suitable for making upvc windows and doors.... Read More

Capacity :
8.3 MT/Day
Plant and Machinery cost:
151.00 Lakhs
Working Capital :
0.00
Rate of Return (ROR):
26.00%
Break Even Point (BEP):
58.00 %
TCI :
0.00 Lakhs
Cost of Project :
681.00Lakhs
Add To Inquiry Basket
Aluminium Foil
Aluminium Foil

Aluminium foil is aluminium prepared in thin metal leaves, with a thickness less than 0.2 millimetres (8 mils), thinner gauges down to 6 µm (... Read More

Capacity :
Aluminium Foil Food Grade (thickness 0.006 mm to 0.150 mm) : 24 MT/Day
Plant and Machinery cost:
310.00 Lakhs
Working Capital :
0.00
Rate of Return (ROR):
29.00%
Break Even Point (BEP):
52.00 %
TCI :
0.00 Lakhs
Cost of Project :
1253.00Lakhs
Add To Inquiry Basket
Ice Making Plant
Ice Making Plant

 

Water when made into a solid mass by the application of cooling is known as ice. It is one of the essential ... Read More

Capacity :
0
Plant and Machinery cost:
0.00 Lakhs
Working Capital :
0.00
Rate of Return (ROR):
0.00%
Break Even Point (BEP):
0.00 %
TCI :
0.00 Lakhs
Cost of Project :
0.00Lakhs
Add To Inquiry Basket
Manufacturing Business of Medical Disposables
Manufacturing Business of Medical Disposables

Manufacturing Business of Medical Disposables. IV Cannula. Cannula Manufacturing System

Read More

Capacity :
0
Plant and Machinery cost:
0.00 Lakhs
Working Capital :
0.00
Rate of Return (ROR):
0.00%
Break Even Point (BEP):
0.00 %
TCI :
0.00 Lakhs
Cost of Project :
0.00Lakhs
Add To Inquiry Basket
Production of Mosquito Repellent Coil
Production of Mosquito Repellent Coil

Production of Mosquito Repellent Coil. Mosquito Repelling Incense Coils Manufacturing Project. Mosquito Coil Composition.<... Read More

Capacity :
0
Plant and Machinery cost:
0.00 Lakhs
Working Capital :
0.00
Rate of Return (ROR):
0.00%
Break Even Point (BEP):
0.00 %
TCI :
0.00 Lakhs
Cost of Project :
0.00Lakhs
Add To Inquiry Basket
Setting Up a Hospital in India
Setting Up a Hospital in India

Setting Up a Hospital in India. Investment Opportunity in Healthcare Industry. Start a Hospital in India.

Read More
Capacity :
0
Plant and Machinery cost:
0.00 Lakhs
Working Capital :
0.00
Rate of Return (ROR):
0.00%
Break Even Point (BEP):
0.00 %
TCI :
0.00 Lakhs
Cost of Project :
0.00Lakhs
Add To Inquiry Basket
How to Start Mustard Oil Mill
How to Start Mustard Oil Mill

How to Start Mustard Oil Mill. Profitable Business Idea. Business with huge Profit in ... Read More

Capacity :
0
Plant and Machinery cost:
0.00 Lakhs
Working Capital :
0.00
Rate of Return (ROR):
0.00%
Break Even Point (BEP):
0.00 %
TCI :
0.00 Lakhs
Cost of Project :
0.00Lakhs
Add To Inquiry Basket
Tissue Paper from Recycled Paper
Tissue Paper from Recycled Paper

 

Tissue paper or simply tissue is a light weight paper or, light crêpe paper. Tissue can be made from r... Read More

Capacity :
20 MT/Day
Plant and Machinery cost:
410.00 Lakhs
Working Capital :
0.00
Rate of Return (ROR):
27.00%
Break Even Point (BEP):
56.00 %
TCI :
0.00 Lakhs
Cost of Project :
986.00Lakhs
Add To Inquiry Basket
Global Countertop Demand is forecast to rise 2.3% yearly through 2021
Global Countertop Demand is forecast to rise 2.3% yearly through 2021

Global Countertop Demand is forecast to rise 2.3% yearly through 2021: Manufacturing Business of Quartz Slabs, Eng... Read More

Capacity :
0
Plant and Machinery cost:
0.00 Lakhs
Working Capital :
0.00
Rate of Return (ROR):
0.00%
Break Even Point (BEP):
0.00 %
TCI :
0.00 Lakhs
Cost of Project :
0.00Lakhs
Add To Inquiry Basket
Production of Tissue Paper from Recycled Paper
Production of Tissue Paper from Recycled Paper

Production of Tissue Paper from Recycled Paper. Recycling of Waste Paper to Tissue Paper

Read More

Capacity :
0
Plant and Machinery cost:
0.00 Lakhs
Working Capital :
0.00
Rate of Return (ROR):
0.00%
Break Even Point (BEP):
0.00 %
TCI :
0.00 Lakhs
Cost of Project :
0.00Lakhs
Add To Inquiry Basket
Surgical Cotton Manufacturing Business
Surgical Cotton Manufacturing Business

Surgical Cotton Manufacturing Business. Absorbent Cotton Roll Production Plant. Absorbent Cotton Wool Manufacturin... Read More

Capacity :
0
Plant and Machinery cost:
0.00 Lakhs
Working Capital :
0.00
Rate of Return (ROR):
0.00%
Break Even Point (BEP):
0.00 %
TCI :
0.00 Lakhs
Cost of Project :
0.00Lakhs
Add To Inquiry Basket
Profitable Business Ideas in Invert Sugar Syrup Manufacturing Industry
Profitable Business Ideas in Invert Sugar Syrup Manufacturing Industry

Profitable Business Ideas in Invert Sugar Syrup Manufacturing Industry. Production of Sweeteners (Inverted Sugar S... Read More

Capacity :
0
Plant and Machinery cost:
0.00 Lakhs
Working Capital :
0.00
Rate of Return (ROR):
0.00%
Break Even Point (BEP):
0.00 %
TCI :
0.00 Lakhs
Cost of Project :
0.00Lakhs
Add To Inquiry Basket
Gold and Silver Jewellery
Gold and Silver Jewellery

Gold is more than a precious metal in Indian culture and is truly entrenched in their belief system. Over centuries and millennia, gold has become ... Read More

Capacity :
0
Plant and Machinery cost:
0.00 Lakhs
Working Capital :
0.00
Rate of Return (ROR):
0.00%
Break Even Point (BEP):
0.00 %
TCI :
0.00 Lakhs
Cost of Project :
0.00Lakhs
Add To Inquiry Basket
NameCapacityRate of return (ROR):Cost of project
Start Production Business... 10 MT per day 45.00 1300.00
Production of Malic Acid ... 0 0.00 0.00
Ferric Pyrophosphate: Sta... 0 0.00 0.00
Flat Glass Manufacturing ... 4000 Sq.Mtrs. per day 24.00 18700.00
Start Production Business... Rubber Granules 5 MT per Day By Product Steel Wire 0.5 MT per Day 28.00 20700000.00
Manufacturing of Aluminiu... Aluminium Alloy Ingots 12 MT per day Aluminium Scrap 0.20 MT per day 26.00 1100.00
Nicotine Sulphate from To... Nicotine Sulphate 3.6 MT per Day Waste Tobacco 28.3 MT per Day 28.00 141600000.00
Natural Tanning Powder P... 600 MT per Annum 28.00 27000000.00
You Should Read SYour Own... 0 0.00 0.00
Set Up Automated Vehicle ... 0 26.00 1455.00
Manufacturing Business Pl... Zinc Ingots (Purity 98%) 6 MT Per Day 29.00 863.00
Pan Masala Sada, Meetha &... Sada Pan Masala (10 gms Size each Pouch) : 165 Kgs / Day Meetha Pan Masala (4 gms Size each Pouch): 30.00 64.00
Business Plan for Rewindi... Rewinding Brunt Electric Motors: 10 Nos./ Day 27.00 1320.00
Plastic Waste Recycling P... Recycled PP Granules : 578 Kgs / Day Recycled LDPE Granules: 720 Kgs / Day Recycled HDPE Granules: 7 26.00 380.00
Start a Toothpaste Manufa... White Toothpaste 50 gms Size: 96,000 Tubes / Day White Toothpaste 240 gms Size: 16,800 Tubes / Day S 36.00 6936.00
Composite Materials-Carbo... Carbon Fibre Composite Laminate M2 width 1500 mm : 833.3 Sq. Mt. / Day Glass Fibre Composite Laminat 29.00 452.00
Manufacturing Business Pl... 0 0.00 0.00
Business Plans for Produc... 0 0.00 0.00
Production of Cellulose (... 0 0.00 0.00
Investment Opportunities ... Dicyandiamide (DCDA): 10 MT / Day 29.00 373.00
How to Start Disposable P... Disposable Plastic Syringes 2 ml Size: 2,000 Boxes/ Day (Each Box = 100 Pcs.) Disposable Plastic Syr 15.00 2006.00
Manufacturing of Humic Ac... Humic Acid: 20 MT / Day 26.00 726.00
Disposable Plastic Syring... Disposable Plastic Syringes with Needle 1 ml Size) : 18,000 Nos / Day Disposable Plastic Syringes 31.00 498.00
Synthetic Camphor (Kapoor... Synthetic Camphor Powder : 8 MT / Day 28.00 1152.00
Manufacturing Business Pl... Dehydrated Onion Sliced/Chopped: 50 MT / Day Cattle Feed as By Product: 35 MT / Day 27.00 5116.00
Production of Biodegradab... 0 0.00 0.00
Production of Rice Husk B... 0 0.00 0.00
Production of Refined Oil... 0 0.00 0.00
Manufacturing of Gum Arab... Arabic Gum (Talha): 6.73 MT / Day 26.00 535.00
Eco-Friendly Bamboo Based... 0 0.00 0.00
12345678910...

Showing 301 - 360 of 2636 Product(s)

Subject of your Interest

Information

  • One Lac / Lakh / Lakhs is equivalent to one hundred thousand (100,000)
  • One Crore is equivalent to ten million (10,000,000)
  • T.C.I is Total Capital Investment
  • We can modify the project capacity and project cost as per your requirement.
  • We can also prepare project report on any subject as per your requirement.
  • Caution: The project's cost, capacity and return are subject to change without any notice. Future projects may have different values of project cost, capacity or return.

NIIR PROJECT CONSULTANCY SERVICES (NPCS) is a reliable name in the industrial world for offering integrated technical consultancy services. NPCS is manned by engineers, planners, specialists, financial experts, economic analysts and design specialists with extensive experience in the related industries.

Our various services are: Detailed Project Report, Business Plan for Manufacturing Plant, Start-up Ideas, Business Ideas for Entrepreneurs, Start up Business Opportunities, entrepreneurship projects, Successful Business Plan, Industry Trends, Market Research, Manufacturing Process, Machinery, Raw Materials, project report, Cost and Revenue, Pre-feasibility study for Profitable Manufacturing Business, Project Identification, Project Feasibility and Market Study, Identification of Profitable Industrial Project Opportunities, Business Opportunities, Investment Opportunities for Most Profitable Business in India, Manufacturing Business Ideas, Preparation of Project Profile, Pre-Investment and Pre-Feasibility Study, Market Research Study, Preparation of Techno-Economic Feasibility Report, Identification and Section of Plant, Process, Equipment, General Guidance, Startup Help, Technical and Commercial Counseling for setting up new industrial project and Most Profitable Small Scale Business.

NPCS also publishes varies process technology, technical, reference, self employment and startup books, directory, business and industry database, bankable detailed project report, market research report on various industries, small scale industry and profit making business. Besides being used by manufacturers, industrialists and entrepreneurs, our publications are also used by professionals including project engineers, information services bureau, consultants and project consultancy firms as one of the input in their research.

Our Detailed Project report aims at providing all the critical data required by any entrepreneur vying to venture into Project. While expanding a current business or while venturing into new business, entrepreneurs are often faced with the dilemma of zeroing in on a suitable product/line.

And before diversifying/venturing into any product, wish to study the following aspects of the identified product:
  • Good Present/Future Demand
  • Export-Import Market Potential
  • Raw Material & Manpower Availability
  • Project Costs and Payback Period

We at NPCS, through our reliable expertise in the project consultancy and market research field, Provides exhaustive information about the project, which satisfies all the above mentioned requirements and has high growth potential in the markets. And through our report we aim to help you make sound and informed business decision.

Reasons for buying the report:
  • This report helps you to identify a profitable project for investing or diversifying into by throwing light to crucial areas like industry size, demand of the product and reasons for investing in the product.
  • This report provides vital information on the product like its definition, characteristics and segmentation.
  • This report helps you market and place the product correctly by identifying the target customer group of the product.
  • This report helps you understand the viability of the project by disclosing details like raw materials required, manufacturing process, project costs and snapshot of other project financials.
  • The report provides forecasts of key parameters which helps to anticipate the industry performance and make sound business decision.
The report contains all the data which will help an entrepreneur find answers to questions like:
  • Why I should invest in this project?
  • What will drive the growth of the product?
  • What are the costs involved?
  • What will be the market potential?

The report first focuses on enhancing the basic knowledge of the entrepreneur about the main product, by elucidating details like product definition, its uses and applications, industry segmentation as well as an overall overview of the industry sector in India. The report then helps an entrepreneur identify the target customer group of its product. It further helps in making sound investment decision by listing and then elaborating on factors that will contribute to the growth of product consumption in India and also talks about the foreign trade of the product along with the list of top importing and top exporting countries. Report includes graphical representation and forecasts of key data discussed in the above mentioned segment. It further explicates the growth potential of the product. The report includes other market data like key players in the Industry segment along with their contact information and recent developments. It includes crucial information like raw material requirements, list of machinery and manufacturing process for the plant. Core project financials like plant capacity, costs involved in setting up of project, working capital requirements, projected revenue and profit are further listed in the report.

  • Our research reports broadly cover Indian markets, present analysis, outlook and forecast.
  • The market forecasts are developed on the basis of secondary research and are cross-validated through interactions with the industry players.
  • We use reliable sources of information and databases. And information from such sources is processed by us and included in the report.

Our Market Survey cum Detailed Techno Economic Feasibility Report Contains following information:

Introduction
  • Project Introduction
  • Project Objective and Strategy
  • Concise History of the Product
  • Properties
  • BIS (Bureau of Indian Standards) Provision & Specification
  • Uses & Applications
Market Study and Assessment
  • Current Indian Market Scenario
  • Present Market Demand and Supply
  • Estimated Future Market Demand and Forecast
  • Statistics of Import & Export
  • Names & Addresses of Existing Units (Present Players)
  • Market Opportunity
Raw Material
  • List of Raw Materials
  • Properties of Raw Materials
  • Prescribed Quality of Raw Materials
  • List of Suppliers and Manufacturers
Personnel (Manpower) Requirements
  • Requirement of Staff & Labor (Skilled and Unskilled) Managerial, Technical, Office Staff and Marketing Personnel
Plant and Machinery
  • List of Plant & Machinery
  • Miscellaneous Items
  • Appliances & Equipments
  • Laboratory Equipments & Accessories
  • Electrification
  • Electric Load & Water
  • Maintenance Cost
  • Sources of Plant & Machinery (Suppliers and Manufacturers)
Manufacturing Process and Formulations
  • Detailed Process of Manufacture with Formulation
  • Packaging Required
  • Process Flow Sheet Diagram
Infrastructure and Utilities
  • Project Location
  • Requirement of Land Area
  • Rates of the Land
  • Built Up Area
  • Construction Schedule
  • Plant Layout and Requirement of Utilities
Assumptions for Profitability workings
Plant Economics
Production Schedule
Land & Building
  • Factory Land & Building
  • Site Development Expenses
Plant & Machinery
  • Indigenous Machineries
  • Other Machineries (Miscellaneous, Laboratory etc.)
Other Fixed Assets
  • Furniture & Fixtures
  • Pre-operative and Preliminary Expenses
  • Technical Knowhow
  • Provision of Contingencies
Working Capital Requirement Per Month
  • Raw Material
  • Packing Material
  • Lab & ETP Chemical Cost
  • Consumable Store
Overheads Required Per Month And Per Annum
  • Utilities & Overheads (Power, Water and Fuel Expenses etc.)
  • Royalty and Other Charges
  • Selling and Distribution Expenses
Salary and Wages
Turnover Per Annum
Share Capital
  • Equity Capital
  • Preference Share Capital
Annexure 1:: Cost of Project and Means of Finance
Annexure 2:: Profitability and Net Cash Accruals
  • Revenue/Income/Realisation
  • Expenses/Cost of Products/Services/Items
  • Gross Profit
  • Financial Charges
  • Total Cost of Sales
  • Net Profit After Taxes
  • Net Cash Accruals
Annexure 3 :: Assessment of Working Capital requirements
  • Current Assets
  • Gross Working. Capital
  • Current Liabilities
  • Net Working Capital
  • Working Note for Calculation of Work-in-process
Annexure 4 :: Sources and Disposition of Funds
Annexure 5 :: Projected Balance Sheets
  • ROI (Average of Fixed Assets)
  • RONW (Average of Share Capital)
  • ROI (Average of Total Assets)
Annexure 6 :: Profitability ratios
  • D.S.C.R
  • Earnings Per Share (EPS)
  • Debt Equity Ratio
Annexure 7 :: Break-Even Analysis
  • Variable Cost & Expenses
  • Semi-Var./Semi-Fixed Exp.
  • Profit Volume Ratio (PVR)
  • Fixed Expenses / Cost
  • B.E.P
Annexure 8 to 11:: Sensitivity Analysis-Price/Volume
  • Resultant N.P.B.T
  • Resultant D.S.C.R
  • Resultant PV Ratio
  • Resultant DER
  • Resultant ROI
  • Resultant BEP
Annexure 12 :: Shareholding Pattern and Stake Status
  • Equity Capital
  • Preference Share Capital
Annexure 13 :: Quantitative Details-Output/Sales/Stocks
  • Determined Capacity P.A of Products/Services
  • Achievable Efficiency/Yield % of Products/Services/Items
  • Net Usable Load/Capacity of Products/Services/Items
  • Expected Sales/ Revenue/ Income of Products/ Services/ Items
Annexure 14 :: Product wise domestic Sales Realisation
Annexure 15 :: Total Raw Material Cost
Annexure 16 :: Raw Material Cost per unit
Annexure 17 :: Total Lab & ETP Chemical Cost
Annexure 18 :: Consumables, Store etc.,
Annexure 19 :: Packing Material Cost
Annexure 20 :: Packing Material Cost Per Unit
Annexure 21 :: Employees Expenses
Annexure 22 :: Fuel Expenses
Annexure 23 :: Power/Electricity Expenses
Annexure 24 :: Royalty & Other Charges
Annexure 25 :: Repairs & Maintenance Exp.
Annexure 26 :: Other Mfg. Expenses
Annexure 27 :: Administration Expenses
Annexure 28 :: Selling Expenses
Annexure 29 :: Depreciation Charges – as per Books (Total)
Annexure 30 :: Depreciation Charges – as per Books (P & M)
Annexure 31 :: Depreciation Charges - As per IT Act WDV (Total)
Annexure 32 :: Depreciation Charges - As per IT Act WDV (P & M)
Annexure 33 :: Interest and Repayment - Term Loans
Annexure 34 :: Tax on Profits
Annexure 35 ::Projected Pay-Back Period And IRR